hostbiz.co

Main menu

  • Home

Check Raid Status Windows

Posted on 2022-03-31 by admin
  • Check Raid Status Windows 7
  • Check Raid Status Windows 10
  • Windows 10 Monitor Raid Health
  • Check Raid Configuration Windows 10
  • Check Raid 1 Status Windows 10

For Dedicated Servers, Value Dedicated Servers and Server Power Deals

The possibilities are disks are in a hardware RAID or not. Rick click on the 'computer' icon on the desktop or the computer item in the Start Menu. Click on Disk Management. In the bottom center pane you'll see Disk 0, Disk 1, etc. On the left column under the Disk number you'll see the word Basic or Dynamic. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.

This article explains how to monitor a hardware RAID and detect when the RAID is defective.

Identify Hardware Controller

The IONOS root servers use hardware controllers from 3ware, Areca, Adaptec, Broadcom or Dell.

Check Raid Status Windows 7

You can check which hardware controller has been installed on your server in the Device Manager in the Storage Controller section. To open the Device Manager, enter the word Device Manager in the search field in the taskbar. You will then be able to select it.

RAID Controller Management Programs

The software required to manage each RAID controller is installed by default. If necessary, you can download the software for the respective controller here:

Adaptec RAID controller:


Broadcom RAID controller:


Dell RAID Controller:


3ware RAID controller:


Areca RAID controller:

Check the Status of the Hardware RAID

Adaptec RAID Controller

The Adaptec RAID controller is managed with the arcconf command line tool. Use the following commands to view detailed information about the Adaptec RAID controller and the configuration:

COMMAND EXPLANATION
arcconf GETCONFIG 1 This command displays information about the RAID controller, the configuration, RAID arrays, available disks and their current state.
arcconf getconfig 1 PD Use this command to display information about the existing hard disks.
arcconf getlogs controller-number device ¦ dead ¦ event [clear ¦ tabular] Use this command to display the log entries. You can use the following parameters to specify the type of log entries displayed:
Example: arcconf getlogs 1 device tabular DEVICE: Shows all log entries with errors the controller could detect on all connected devices.
DEAD: Shows all log entries where device and hard disk failures were recorded.
EVENT: Shows all log entries with information about special events (e.g. rebuilds, LDMs, etc.)
You can also specify the following parameters:
tabular: Displays the log in table format.
clear: Deletes the specified controller protocol.
arcconf getlogs controller-number device ¦ dead ¦ event [clear ¦ tabular] > FILENAME.log This command writes the log entries to a file.
Example: arcconf getlogs 1 device tabular > device.log

Check Raid Status Windows 10

Broadcom RAID Controller

The Broadcom RAID controller is managed and controlled with the StorCLI command line tool. Use the following commands to display detailed information about the Broadcom RAID controller and the configuration:

COMMAND EXPLANATION
storcli64 /c0 show all This command displays information about the RAID controller and the configuration.
storcli64 /c0/eall/sall show Use this command to display information about the existing hard disks.
storcli64 /c0/eALL/sALL show all This command displays information about the available disks and their current status (serial number, temperature, etc.).
storcli /cx show eventloginfo Use this command to display the log entries.
Dell RAID Controller

The Dell RAID controller is managed using the PowerEdge RAID Controller command line interface (PERCCLI). Use the following commands to view detailed information about the Dell RAID controller and the configuration:

COMMAND EXPLANATION
perccli64 /c0/e32/s0 show all Use this command to display information about disk 0.
perccli64 /c0/e32/s1 show all Use this command to display information about disk 1.
perccli64 /c0 show Use this command to display information about the existing hard disks.
perccli /c0 show eventloginfo This command displays the log entries for controller 0.

3ware RAID Controller

tw_cli

Windows 10 Monitor Raid Health

The 3ware RAID controller is managed with the 3ware Storage Controller management command line interface. To open the command line interface enter the command tw_cli. Use the help command to display all available commands.

Please Note

If the 3ware Storage Controller Management Command Line Interface is not available on your server, you can download it on the following page:

To display information about the status of the RAID system, type the info command. This command displays information about the RAID and its current status. In this example, the RAID5 has a capacity of 1.36 TB and consists of 3 hard disks.

To display hardware RAID controller alerts, use the show alarms command:

An alarm message is displayed in the format shown below. In this example the third hard disk (unit=0, vport 2) has failed:

To remove the defective hard disk from the RAID on the third port (p2), enter the following command:

Check Raid Configuration Windows 10

After replacing the defective hard disk, the new hard disk has to be recognized. To do this, enter the following command:

To mount and rebuild a disk on the third port, type the following command:

To view information about rebuilding the RAID, type the following command:

Monitor 3ware RAID Controllers with the Software 3ware Disk Manager 2

3ware offers the software 3ware Disk Manager 2 (3dm2). With this software, you can manage and monitor the 3ware RAID controller.

You can download 3ware Disk Manager 2 here:

3ware Documentation

For more information on installation, configuration and application, please refer to the 3ware documentation. You can find it here:

Check Raid 1 Status Windows 10

Areca RAID Controller

Download the and run it on your server.

The complete CLI manual can be downloaded from Areca at .

Below, some sample commands are listed.

With the command < cmd> info you can request system information. For example, after entering the hw info command, the hardware monitor information is displayed:

To display information about the disks, type the following command:

Use the following command to display system information about the Areca RAID controller:

To display current events, type the following command:

Use the following command to get information about the current RAID set:

In this example the RAID set consists of 3 x 750 GB.

Check Raid Status Windows

To display information about the logical RAID volumes, type the following command:

Areca Documentation

For further information on installation, configuration and application, please refer to the Areca documentation. You can find it here:

Required Steps after Replacing a Hard Disk

When a defective hard disk is replaced, the rebuild of the RAID system usually starts automatically. To ensure the functionality of the RAID system, we recommend to monitor the rebuild of the RAID system.

Post navigation

Cali Tv Card Driver Download
My Idea Apk Download For Android

Latest Articles

  • Big Book Of Nlp Techniques Pdf
  • Adobe Illustrator Cs6 Middle East Version Free Download For Mac